Magnet Promises to Revolutionize High Field Research
October 28, 2009
William Denis Markiewicz, (850) 644-0996
Cross-sectional diagram of the planned 32-tesla superconducting magnet. The magnet will consist of three YBCO coils (yellow), three niobium-tin coils (red) and two niobium-titanium coils (blue).
TALLAHASSEE, Fla. — The National High Magnetic Field Laboratory has been awarded nearly $3 million to build a novel kind of superconducting magnet that will break records for magnetic field strength, make possible new types of science and save vast amounts of energy and money.
The magnet, funded by a National Science Foundation grant of $2 million and a matching award from The Florida State University of $1 million, is projected to generate a magnetic field of 32 tesla. (Tesla is the scientific unit of measure of magnetic field strength.) That is more than 3,000 times stronger than a typical refrigerator magnet, and about 45 percent more powerful than the strongest superconducting magnets available today.
As impressive as that sounds, it is just the tip of the scientific iceberg. The material that will be used for this magnet, a type of high-temperature superconductor called yttrium barium copper oxide, or YBCO, promises to revolutionize research in high magnetic fields.
Superconducting magnets have been powering hospital MRI machines for decades (at about 1 to 3 tesla) and are commonly used in high-field research. They are valuable in part because they are made with special superconducting materials that conduct electricity without any friction, and therefore use very little electricity. Non-superconducting electromagnets, called resistive magnets, consume massive amounts of electricity. At the magnet lab, the average cost to run a resistive magnet is $774 per hour – 40 times more than a 20-tesla superconducting magnet.
One of the downsides to superconducting magnets is that the materials they are built with work only at temperatures so low that expensive cryogens, such as liquid helium, are needed to operate them. Also, traditional superconducting materials stop working inside a magnetic field above about 23 tesla, so resistive magnets have always been able to outperform them.
- Stephen Julian – The University of Toronto physicist talks about what this magnet will mean to scientists.
- Denis Markiewicz – The designer of the 32-tesla magnet explains what makes it so special.
Listen or Download MP3
But YBCO oversteps both these hurdles. It belongs to a class known as high-temperature superconductors. These materials perform at much higher temperatures than their "low-temperature" cousins, making them more practical and cheaper to operate – and they continue to operate beyond the point at which low-temperature superconductors cease working. Another huge benefit: Superconducting magnets create more stable magnetic fields than resistive magnets, which produce better data for scientists. All of this means the 32-tesla project will be the first of a whole new generation of powerful, low-cost superconducting magnets.
William Denis Markiewicz, principal investigator on the project, foresees the day when the lab's existing lineup of resistive magnets becomes obsolete.
"The objective is to develop and demonstrate the technology that can be used in magnets that will eventually replace the resistive magnets in our facility," said Markiewicz, a veteran engineer at the lab whose design achievements include the lab's world-record 900 megahertz, ultra-wide-bore superconducting magnet. "The advantages that will follow include lower operating costs and quieter field conditions for the scientist."
Field strength: 32 tesla
Bore size: 34 mm
Cost: $3 million
Explected completion: Fall 2012
Miles of YBCO cable: About 5
Field uniformity: 5x10-4 1 cm
To have 32 tesla, at such high quality, for such a bargain price will be nothing less than a boon for physics, said Stephen Julian, a
University of Toronto physicist who sits on the magnet lab's External Advisory Board and is a co-principal investigator on the grant.
"This magnet opens up new possibilities for measurements that we have previously only dreamed of," Julian said. "With these new magnets, researchers will be able to stay at these very high magnetic fields for as long as they like. This will dramatically increase the quality of data for many measurements. We can look forward to breakthroughs in biomedical magnetic resonance imaging, studies of protein structure, semiconductor physics and the physics of metals."
Perhaps most fittingly, this new magnet will advance research on the high-temperature superconductors themselves, a primary interest of David Larbalestier, chief materials scientist at the lab and the other co-principal investigator on the grant.
"We're going to be using high temperature superconductors to understand high temperature superconductors, and that seems quite fun," Julian said.
The National High Magnetic Field Laboratory develops and operates state-of-the-art, high-magnetic-field facilities that faculty and visiting scientists and engineers use for research. The laboratory is sponsored by the National Science Foundation and the state of Florida. To learn more visit www.magnet.fsu.edu.