About the National High Magnetic Field Laboratory
Getting to the Mag Lab Community Outreach Find an Employee

Magnet Lab Home > Personnel Search

ArrowNational High Magnetic Field Laboratory Personnel

Mr. Robert P. Walsh

Research Associate
Magnet Science & Technology, Scientific Staff

Email:
Phone: 850 - 644-5088
Alt. Phone: 850 - 645-4617
Fax: 850 - 644-0867
Address: A209 NHMFL FSU
1800 E. Paul Dirac Dr.
Tallahassee , FL 32310-3706

Educational Background:
Rochester Institute of Technology Mechanical Engineering BS (1982)
Monroe Community College Mech. Engineering Tech. AAS (1978)

Research Interests:
Material properties at low temperature
High strength materials
Composite materials
Mechanical test design
Measurement sensor technology, computer data acquisition

Professional Experience:
3/93-date Staff Scientist, Magnet Science & Technology, National High Magnetic Field Laboratory, Tallahassee, Florida

5/82-3/93 Mechanical Test Engineer, Materials Reliability Division, National Institute of Standards and Technology, Boulder, Colorado

1/80-5/82 Engineering Co-op Student, Fracture & Deformation Division, National Institute of Standards and Technology, Boulder, Colorado

9/78-9/79 Mechanical Technician, SCM Corporation, Cortland, NY

Experience:
·Management of a Materials R&D Group (NHMFL)
·Conduct of materials research and development (NHMFL and NIST)
·Engineering materials selection for design (NHMFL and NIST)
··Measurement sensor technology (NHMFL and NIST)
·Technology transfer and data base management (NHMFL and NIST)



Disclaimer: The information presented below was automatically generated from a database. In the rare instance of an exact name match, it is possible that a citation is inaccurately attributed. The listing should therefore be considered unofficial. To report a mismatched publication, contact IMsystems@magnet.fsu.edu.


Publications and Scientific Activities

##Peer-Reviewed Publications
1 Dixon, I.R.; Bird, M.D.; Bonito-Oliva, A.; Cantrell, K.R.; Lu, J.; Miller, G.E.; Noyes, P.D.; Walsh, R.P. and Weijers, H.W., Electromagnetic Cycling and Strain Effects on N3Sn Cable-In-Conduit Conductors with Variations in Cabling Design and Conduit Materials, IEEE Trans. Appl. Supercond., 19 (3), 1462-1465 (2009)
2 Han, K.; Xin, Y.; Walsh, R.P.; Downey, S. and Kalu, P.N., The effects of grain boundary precipitates on cryogenic properties of aged 316-type stainless steels, Materials Science and Engineering, 516, 169-179 (2009) [read online]
3 Lu, J.; Han, K.; Walsh, R.P.; Dixon, I.; Ferrera, A. and Seeber, B., Characterization of High Jc Nb3Sn Strands for the Series-Connected Hybrid Magnet, IEEE Trans. Appl. Supercond., 19 (3), 2615-2618 (2009)
4 Lu, J.; Walsh, R.P. and Han, K., Low temperature physical properties of a high Mn austenitic steel JK2LB, Cryogenics, 49 (3-4), 133-137 (2009) [read online]
5 Bonito-Oliva, A.; Bird, M.D.; Bole, S.T.; Cantrell, K.R.; Gavrilin, A.V.; Luongo, C.A.; Dixon, I.R.; Han, K.; Lu, J.; Miller, G.E.; Noyes. P.D.; Painter, T.A.; Weijers, H.W.; Walsh, R.P. and Zhai, Y., Development of the Superconducting Outserts for the Series-Connected-Hybrid Program at the National High Magnetic Field Laboratory, IEEE Trans. Appl. Supercond., 18 (NO. 2, June), 529-535 (2008)
6 Lu, J.; Han, K.; Toplosky, V.; Adkins, T.; Bole, S. T. and Walsh, R.P., The inter-strand contact resistance of Nb3Sn cable-in-conduit conductor with hydrocarbon oil, Superconductor Science and Technology, 21, 115011 (2008) [read online]
7 Lu, J.; Han, K.; Walsh, R.P. et al., Critical current longitudinal and transverse strain sensitivities of high JC Nb3Sn conductors, IEEE Trans. Appl. Supercond., 18 (2), 1014-1017 (2008)
8 Walsh, R.P.; Han, K. and Toplosky, V.J., Fracture Toughness Measurements and Assessment of Thin Walled Conduit Alloys in a CICC Application, Adv. Cryog. Eng., 54, 69 (2008)
9 Lu, J.; Choi, E.S.; Walsh, R.P.; Goddard, R.; Han, K. and Miller, J.R., Characterization of Nb3Sn superconductors for hybrid magnets, IEEE Trans. Appl. Supercond., 17 (2), 2651 (2007)
10 Lu, J.; Han, K.; Walsh, R.P. and Miller, J.R., Ic axial strain dependence of high current density Nb3Sn conductors, IEEE Trans. Appl. Supercond., 17 (2), 2639 (2007)
11 Han, K.; Walsh, R.P.; Toplosky, V.J.; Goddard, R. and Bird, M.D., Microstructure and Cryogenic Mechanical Properties of A 316L Plate and its Weldments, Adv. Cryog. Eng., 52A, 99-106 (2006)
12 Swenson, C.A.; Gavrilin, A.V.; Han, K.; Walsh, R.P.; Schneider-Muntau, H.J.; Rickel, D.G.; Schillig, J.B.; Ammerman, C.N. and Sims, J.R., Performance of 75T Prototype Pulsed Magnet, IEEE Trans. Appl. Supercond., 16 (2), 1650-1655 (2006)
13 Toplosky, V.J. and Walsh, R.P., Thermal and Mechanical Properties of Poly-Dicyclopentadiene (DCPD) at Cryogenic Temperatures, Adv. Cryog. Eng., 824, 219-224 (2006)
14 Walsh, R.P. and Swenson, C.A., Mechanical Properties of Zylon/Epoxy Composite at 295 K and 77 K, IEEE Trans. Appl. Supercond., 16 (2), 1761-1764 (2006)
15 Walsh, R.P.; Toplosky, V.J.; Han, K. and Miller, J. R., Effect of an Aging Heat Treatment on the 4 K Fracture and Fatigue Properties of 316LN and Haynes 242, Adv. Cryog. Eng., 52, 107-114 (2006)
16 Walsh, R.P.; Topolosky, V.J.; Han, K.; Heitzenroeder, P.J. and Nelson, B.E., 77K Fatigue Crack Growth Rate of Modified CF8M Stainless Steel Castings, Adv. Cryog. Eng., 52A, 138-144 (2006)
17 Trociewitz, U.P.; Walsh, R.P.; Toplosky, V.J.; Weijers, H.W. and Miller, J., A Device to Evaluate the In-field Transport Properties of Superconductors under Strain, IEEE Trans. Appl. Supercond., 15 (2), 3458-3461 (2005)
18 Campbell, L.C.; Embury, D.; Han, K.; Parkin, D.M.; Baca, A.G.; Kihara, K.H.; Sims, J.R.; Boebinger, G.; Eyssa, Y.; Lesch, B.; Li, L.; Schillig, J.; Schneider-Muntau, H. and Walsh, R., Megagauss Fields During Milliseconds, Proc. Megagauss Magnetic Field Generation, Its Application to Science and Ultra-high Pulsed-power Technology, Schneider-Muntau, H., editor, World Scientific, MGVIII, 85-90 (2004)
19 Han, K.; Walsh, R.P.; Ishmaku, A.; Toplosky, V. and Embury, J.D., High strength and high electrical conductivity bulk Cu, Philos. Mag. A, 84 (34), 3705-3716 (2004) [read online]
20 Schneider-Muntau, H.J.; Han, K.; Bednar, N.A.; Swenson, C.A. and Walsh, R., Materials for 100T Monocoil Magnets, IEEE Trans. Appl. Supercond., 14 (2), 1153-1156 (2004)
21 Walsh, R.P. and Toplosky, V.J., Axial Reverse-Cycle Fatigue Tests of High Strength Pulse Magnet Conductors at 77 K, Adv. Cryog. Eng. Materials, 50A, 59-66 (2004)
22 Walsh, R.P.; Miller, J.R. and Toplosky, V.J., Characterization of Alloys with Potential for Application in Cable-in-Conduit Conductors for High-Field Superconducting Magnets, Adv. Cryog. Eng. Materials, 50A, 145-150 (2004)
23 Han, K.; Ishmaku, A.; Xin, Y.; Garmestani, H.; Toplosky, V.J.; Walsh, R.; Swenson, C.; Lesch, B.; Ledbetter, H.; Kim, S.; Hundley, M. and Sims, J.R., Mechanical properties of MP35N as a reinforcement material for pulsed magnets, IEEE Trans. Appl. Supercond., 12 (1), 1244-1247 (2002)
24 Han, K.; Toplosky, V.J.; Walsh, R.; Swenson, C.; Lesch, B. and Pantsyrnyi, V.I., Properties of high strength Cu-Nb conductor for pulsed magnet applications, IEEE Trans. Appl. Supercond., 12 (1), 1176-1180 (2002)
25 Niahimura, A.; Nyilas, A.; Ogata, T.; Shibata, K.; Chan, J.W.; Walsh, R.P. and Mitterbacher, H., International Round Robin Test Results of J-evaluation on Tensile Test at Cryogenic Temperature within the Frame Work of Vamas Activity, Adv. Cryog. Eng. Materials, 48A, 115-122 (2002)
26 Toplosky, V.J. and Walsh, R.P., Tensile Testing Methods of High Strength and High Magnetic Field Composite Wires, Adv. Cryog. Eng. Materials, 48A, 53-60 (2002)
27 Walsh, R.P. and Toplosky, V.J., Some Engineering Properties of Cotton-Phenolic Laminates, Adv. Cryog. Eng. Materials, 48A, 204-210 (2002)
28 Walsh, R.P.; Han, K.; Toplosky, V.J. and Mitchell, R.R., Low Temperature Tensile and Fracture Characteristics of High Purity Niobium, Adv. Cryog. Eng. Materials, 48A, 186-193 (2002)
29 Brandao, L.; Han, K.; Embury, J.D.; Walsh, R.; Toplosky, V. and Van Sciver, S.W., Development of High Strength Pure Copper Wires by Cryogenic Deformation for Magnet Applications, IEEE Trans. Appl. Supercond., 10 (1), 1282-1287 (2000)
30 Brandao, L.; Walsh, R.P.; Han, K.; Embury, J.D. and Van Sciver, S.W., New Cryogenic Processing for the Development of High Strength Copper Wire for Magnet Applications, Adv. Cryog. Eng. Materials, 46A, 89-96 (2000)
31 Li, L.; Lesch, B.; Eyssa, Y.; Han, K.; Walsh, R.; Schneider-Muntau, H.J.; Sims, J.; Schillig, J.; Boenig, H.; Mielke, C. and Boebinger, G., Insert Coil Design of the First 100 T Non-Destructive Magnet, IEEE Trans. Appl. Supercond., 10 (1), 518-521 (2000)
32 Markiewicz, W.D.; Dixon, I.R.; Marshall, W.S. and Walsh, R.P., Epoxy Lead Cones For Free Supported Leads, IEEE Trans. Appl. Supercond., 10 (1), 1321-1324 (2000)
33 Painter, T.; Walsh, R.; Williams, V.; Toplosky, V. and Maier, S., Conductor and Reinforcement Materials for the Los Alamos Neutron Science Center 30 T Split-Pair and Future Pulse Coils, IEEE Trans. Appl. Supercond., 10 (1), 1292-1295 (2000)
34 Toplosky, V.J.; Walsh, R.P.; Tozer, S.W. and Motamedi, F., Mechanical and Thermal Properties of Unreinforced and Reinforced Polyphenylenes at Cryogenic Temperatures, Adv. Cryog. Eng. Materials, 46A, 151-158 (2000)
35 Walsh, R.P., Tension-Compression Testing at Low Temperatures, ASM Handbook, Mechanical Testing and Evaluation, 8, 164-171 (2000)
36 Walsh, R.P.; Mitchell, R.R.; Toplosky, V.J. and Gentzlinger, R.C., Low Temperature Tensile and Fracture Toughness Properties of SCRF Cavity Structural Materials, Proc. 9th Annual Workshop on RF Superconductivity, 1, 195-197 (2000)
37 Eyssa, Y.M.; Boenig, H.; Robinson, R.; Bird, M.D.; Walsh, R.; Pernambuco-Wise, P. and Schneider-Muntau, H.-J., 30 T Water Cooled Pulse Magnet for Neutron Scattering Experiment, Proceedings of the 15th International Conference on Magnet Technology, Science Press, Beijing, 1, 691-694 (1998)
38 Walsh, R.P.,Schneider-Muntau, H. J. and Lottin, J. C., Determination of the Thermal and Mechanical Strain Behavior of NbTi/Cu Cable Embedded in an Aluminum Stabilizer, Adv. Cryog. Eng. Materials, 44, 1007-1012 (1998)
39 Walsh, R.P.; Miller, J.R.; Dixon, I.R.; and Miller, G.E, Lorentz Force Simulation Tests on a Full-Scale Prototype Model Coil of the 45-T Hybrid Magnet, Adv. Cryog. Eng., 44B, 999-1006 (1998)
40 Dixon, I.R.; Walsh, R.P. and Markiewicz, W.D., Mechanical Properties of Epoxy Impregnated Superconducting Solenoids, IEEE Trans. on Magnetics, 32 (4), 2917-2920 (1996)
41 Walsh, R.P., Summers, L.T. and Sims, J.R., The Fatigue and Tensile Properties of Dispersion Strengthened Copper at Low Temperatures (77 K to 295 K), Adv. Cryog. Eng., 42, 493-498 (1996)
42 Walsh, R.P., McColskey, J.D. and Reed, R.P., Low Temperature Properties of a Unidirectionally Reinforced Epoxy Fiberglass Composite, Cryogenics, 35 (11), 723-726 (1995)
43 Walsh, R.P. and Reed, R.P., Thermal Expansion Measurements of Resins (4K - 300K), Adv. Cryog. Eng. Materials, 40, 1145-1151 (1994)
44 Walsh, R.P., Reed, R.P. and McColskey, J.D., Large Scale Tests of Composite Support Struts for Superconducting Magnetic Energy Storage Rings, Adv. Cryog. Eng. Materials, 38, 421-428 (1992)
##Presentations, Posters & Abstracts
1 Lu, J.; Downey, S.T.; Goddard, R.; Han, K.; Kalu, P.N.; Toplosky, V.J.; Walsh, R.P. and Xin, Y., Comparison and Understanding of Cryogenic Properties of 316LN and MP35N, Cryogenic Engineering and Int. Cryogenic Materials Conf., Tucson, AZ, June 28-July 02 (2009)
2 Lu, J.; Han, K. and Walsh, R.P., Low Temperature Physical Properties of a High Mn Austenitic Steel JK2LB, Cryogenic Engineering and Int. Cryogenic Materials Conf., Tucson, AZ, June 28-July 02 (2009)
3 Toplosky, V.J.; Han, K. and Walsh, R.P., Fatigue properties of modified 316LN Stainless Steel Metal at 4 K for High Field Cable-in-Conduit Applications, Cryogenic Engineering and Int. Cryogenic Materials Conf., Tucson AZ, June 28-July 2 (2009)
4 Weijers, H.W.; Lu, J.; Trociewitz, U.P.; Walsh, R.P. and Markiewicz, W.D., Electro-mechanical characterization of HTS and LTS conductors at the NHMFL, Superconductivity Research Center, Korea Electrotechnology Research Institute (KERI), Changwon, Korea, July 15 (2009) [read online]
5 Weijers, H.W.; Walsh, R.P. and McRea, D., Curve fitting of stress-strain curve and RRT of Ag/Bi-2212 round wires, IEC TC90 WorkGroup 5-Andong meeting, Andong, Korea, July 13-14 (2009) [read online]
6 Bird, M.D.; Adkins, T.; Bole, S.; Cantrell, K.; Dixon, I.R.; Gavrilin, A.V.; Lu, J.; Painter, T.A.; Toth, J.; Walsh, R.P.; Weijers, H.W.; Xu, T. and Zhai, Y., The NHMFL Hybrid Magnet Projects, 2008 Applied Superconductivity Conf., Chicago, IL, August 18-22 (2008)
7 Dixon,I.R.; Bird, M.D.: Cantrell, K.R.; Bonito-Oliva, A.; Lu, J,; Miller, G. E,; Noyes, P.D.; Walsh, R. P.; Weijers, H.W., Electromagnetic Cycling and Strain Effects on Nb3Sn Cable-in-Conduit Conductors with Variations in Cabling Design and Conduit Material Properties, 2008 Applied Superconductivity Conf., Chicago, IL, August 18-22 (2008)
8 Han, K.; Xin, Y. and Walsh, R., An Intermetallic Precipitate Strengthened Alloy for Cryogenic Applications, MRS Annual Conf., Boston, MA, December 1-5 (2008)
9 Lu, J.; Han, K.; Walsh, R.P.; Dixon, I.R.; Bonito-Oliva, A.; Ferreira, A. and Seeber, B., Characterization of High Jc Nb3Sn Strands for the Series-Connected Hybrid Magnet, 2008 Applied Superconductivity Conf., Chicago, IL, August 18-22 (2008)
10 Lu, J.; Toplosky, V.J.; Goddard, R.E.; Walsh, R.P.; Han, K.; Martovetsky, N.N. and Miller, J.R., The Ic Irreversibility Strain, Mechanical Properties and Microstructures of ITER High Jc Nb3Sn Strands, 2008 Applied Superconductivity Conf., Chicago, IL, August 18-22 (2008)
11 Walsh, R.P., Thermal Expansion and Modulus Measurements of Nb3Sn Cable-in-Conduit-Conductors, 2008 Applied Superconductivity Conf., Chicago, IL, August 18-22 (2008)
12 Bonito-Oliva, A.; Bird, M.D.; Bole, S.T.; Cantrell, K.R.; Gavrilin, A.V.; Luongo, C.A.; Dixon, I.R.; Han, K.; Lu, J.; Miller, G.E.; Noyes, P.D.; Painter, T.A.; Weijers, H.W.; Walsh, R.P. and Zhai, Y., Development of the Superconducting Outserts for the Series-Connected-Hybrid Program at the National High Magnetic Field Laboratory, 20th Biennial Int. Conf. on Magnet Technology (MT-20), Philadelphia, PA, August 27-31 (2007)
13 Han, K.; Walsh, R.P.; Toplosky, V.; Goddard, R.; Lu, J. and Dixon, I.R., Effects of Winding Strain and Heat Treatment on Properties of 316 LN and Haynes 242, 2007 CEC-ICMC, Chattanooga, TN, July 16-20 (2007)
14 Lu, J.; Han, K.; Walsh, R. and Bole, S.T., Longitudinal and Transversal Strain Sensitivities of High Jc Nb3Sn, 2007 CEC/ICMC, Chattanooga, TN, July 16-20 (2007)
15 Lu, J.; Han, K.; Walsh, R.P.; Adkins, T. and Bole, S.T., IC longitudinal and transverse strain sensitivities of high JC Nb3Sn conductors, The 20th Biennial Conf. on Magnet Technology, Philadelphia, PA, August 27-31 (2007)
16 Walsh, R.; Han, K.; Toplosky, V. and Goddard, R., Fracture Toughness Measurements and Assessment of Thin Walled Conduit Alloys in a CICC Application, 2007 CEC/ICMC, Chattanooga, TN, July 16-20 (2007)
17 Han, K.; Choi, E.S.; Lu, J.; Walsh, R.P.; Toplosky, V.J.; Goddard, R.E. and Miller, J.R., Nb3Sn Conductor Characterization for Hybrid Magnets at NHMFL, ASC 2006, Seattle, WA, August 28 (2006)
18 Lu, J.; Han, K.; Walsh, R.P. and Miller, J.R., Ic-strain characterization of Nb3Sn conductors used for high field superconducting magnets at NHMFL, ASC 2006, Seattle, WA, August 29 (2006)
19 Lu, J.; Han, K.; Walsh, R.P.; Bole, S.T. and Bird, M.D., Investigation of axial and transversal strain sensitivities of Nb3Sn at the NHMFL, Low Temperature Superconductor Workshop, Tallahassee, FL, November 6 (2006)
20 Han, K.; Walsh, R.P.; Toplosky, V.J.; Goddard, R. and Bird, M.D., Microstructure and Cryogenic Mechanical Properties of a 316L Plate and its weldments, CEC/ICMC, Keystone, CO, August 29 - September 2 (2005)
21 Lu, J.; Han, K.; Choi, E.; Trociewitz, U.P.; Walsh, R.P.; Toplosky, V.J.; Goddard, R.E.; Xin, Y. and Miller, J.R., Test capabilities at the NHMFL, Low Temperature Superconductor Workshop, Napa, CA, November 7 (2005)
22 Swenson, C.A.; Gavrilin, A.V.; Han, K.; Walsh, R.P.; Schneider-Muntau, H.; Rickel, D.G.; Schillig, J.S. and Sims, J.R., Performance of 75 T Prototype Pulsed Magnet, 19th Int. Conf. on Magnet Technology, Genova, Italy, September 19 -23 (2005)
23 Toplosky, V.J. and Walsh, R.P., Thermal and Mechanical Properties of Poly-Dicyclopentadiene (DCPD) at Cryogenic Temperatures, CEC/ICMC, Keystone, CO, August 29 - September 2 (2005)
24 Purcell, K.M.; Alexander, C.S.; Crow, J.E.; Gavrilin, A.V., and Walsh, R.P., Assessment of Uniaxial Strain with a Standard Piston-Cylinder Pressure Cell, American Physical Society March Meeting, Montreal, Canada, March 22-26 (2004)
25 Trociewitz, U.P.; Walsh, R.P.; Toplosky, V.J.; Weijers, H.W. and Miller, J., A Device to Evaluate the In-field Transport Properties of Superconductors under Strain, Applied Superconductivity Conf., Jacksonville, FL, October 3-8 (2004)
26 Bednar, N.A.; Walsh, R.P. and Swenson, C.A., Mechanical Properties of Zylon/Epoxy Composite at 295 K and 77 K, CEC/ICMC 2003, Anchorage, AK, September 22-26 (2003)
27 Walsh, R.P. and Toplosky, V.J., Axial Reverse-Cycle Fatigue Tests of High Strength Pulse Magnet Conductors at 77 K, CEC/ICMC 2003, Anchorage, AK, September 22-26 (2003)
28 Walsh, R.P.; Miller, J.R. and Toplosky, V.J., Characterization of Alloys with Potential for Application in Cable-in-Conduit Conductors for High-Field Superconducting Magnets, CEC/ICMC 2003, Anchorage, AK, September 22-26 (2003)
29 Han, K.; Ishmaku, A.; Xin, Y.; Garmestani, H.; Toplosky, V.J.; Walsh, R.; Swenson, C.; Lesch, B.; Ledbetter, H.; Kim, S.; Hundley, M. and Sims, J.R., Mechanical Properties of MP35N as a Reinforcement Material for Pulsed Magnets, 17th International Conference on Magnet Technology, Geneva, Switzerland, September 24-28 (2001)
30 Toplosky, V.J. and Walsh, R.P., Tensile Testing Methods of High Strength and High Magnetic Field Composite Wires, CEC/ICMC 2001 Conference, Madison, WI, July 16-20 (2001)
31 Walsh, R.P. and Toplosky, V.J., Some Engineering Properties of Cotton-Phenolic Laminates, CEC/ICMC 2001 Conference, Madison, WI, July 16-20 (2001)
32 Walsh, R.P.; Han, K.;Toplosky, V.J. and Mitchell, R.R., Low Temperature Tensile and Fracture Characteristics of High Purity Niobium, CEC/ICMC 2001 Conference, Madison, WI, July 16-20 (2001)
33 Eyssa, Y.M.; Boenig, H.; Robinson, R.; Bird, M.D.; Walsh, R.; Pernambuco-Wise, P. and Schneider-Muntau, H.-H., 30 T Water Cooled Pulse Magnet for Neutron Scattering Experiment, MT-15, Beijing, China, October (1997)
##Books, Chapters, Reviews and Other One-Time Publications
1 Walsh, R.P., "Tension-Compression Testing at Low Temperatures", ASM Handbook, Mechanical Testing and Evaluation, 8, 164-171, 2000.
##Patents & Other Products
1 Han, K.; Walsh, R. and Embury, J.D., "Method and apparatus for making high strength metals with a face-centered-cubic structure", (2009)
2 Markiewicz, D.; Dixon, I.; Swenson, C.; Marshall, S.; Walsh, R.; Painter, T. and Van Sciver, S.W., "Wide Bore High Field Magnet", U.S. Patent No. 7,015779, dated 3/21/2006 (2006)
3 Markiewicz, W.D.; Dixon, I.R.; Swenson, C.A.; Marshall, W.S.; Walsh, R.P.; Painter, T.A. and Van Sciver, S., "Method of manufacturing a superconducting magnet", U.S. Patent No. 6,735,848 B1 Awarded May 18, 2004 (2004)
##Grants
1 PI: Han, K. and Walsh, R.,
 Grant Title: Development of High Strength Composite Conductors for Magnet Applications
 Agency: NHMFL-IHRP
 Project Dates: 1/1/2002 - 12/31/2004
 Award Amount: $290000
2 PI: Walsh, R. P.,
 Grant Title: High Strain Rate Materials Study
 Agency: Spalding Sports Worldwide Inc.
 Project Dates: 10/27/01 - 10/27/02
 Award Amount: $40,000




Comments & Questions | Privacy Policy | Copyright
© 1995 - 2009 National High Magnetic Field Laboratory
1800 E. Paul Dirac Drive, Tallahassee, FL 32310 - 3706

footer NSF logo State of Florida logo

Phone: (850) 644 - 0311
Fax: (850) 644 - 8350
Email: Magnet Lab Webmaster